Sony PWS-4500 Operation Manual page 32

Audio
Audio Input Select
Selects the external channel to record for each audio file
track. Also selects the type of each signal (SDI or AES/
EBU) to record.
Not displayed in NMI mode.
Track Number
Selects the number of audio tracks for recording.
• 8 track
• 16 track
AES/EBU Input Mode
Selects whether to pass the input AES/EBU signal through
a sampling rate converter when recording.
• Auto: Use converter. In this case, there are no limitations
on input signals.
• Vlock: Do not use converter. In this case, the input
signals need to be locked to the video signal at 48 kHz.
Noise will occur if this condition is not met.
SDI Source Port
For dual-system input per board, this selects whether the
audio signal is input on the main port or the sub-port.
• x-1: Selects the main port audio signal.
• x-2: Selects the sub-port audio signal.
"x" represents the port (A to D).
Audio Source
Selects whether to record the master audio or the audio
signal that is input on each port.
Non-Audio Input Select
Selects whether to input non-audio data.
• Invalid
• SDI-Data
• NMI-Data
• A/E-Data
Internal SG
Selects the type of signal output from the internal signal
generator.
• Off: No output
• Silence: Silence signal
• 1kHz: 1 kHz sine wave
32
Port Screen