Selecting Bbe Mode - Alpine TDA-7567R Owner's Manual

1
2
3
4
30
BBE
BBE
BBE
BBE
Basic Operation

Selecting BBE Mode

(TDA-7567R only)
The BBE (Barcus Berry Electronics) processor
installed in this unit is designed to correct the
phase distortion inherent in most loudspeaker
designs. Ensuring the phase integrity of the
signal driving the speakers improves the
accurate reproduction of the sound.
Press the BBE button to turn on or off the BBE
mode. The BBE level is preset to "BBE +5" at
the factory.
Note: The BBE processor is especially
effective when used in conjunction with
optional surround processors.
To change to a desired BBE level, press and
hold the BBE button for at least 2 seconds to
activate the BBE setting mode.
Press the ∨ and ∧ buttons to choose the
desired level. Each press changes the level by
one step.
The initial setting is +5 and you can select in 6
steps (from +1 to +6).
Press the BBE button to deactivate the BBE
setting mode.
Note: The BBE level setting is automatically
memorized. The setting remains until
you manually change it.
English