Alpine TDA-7567R Owner's Manual page 50

1
2
3
4
F1 F2
5
F1 F2
50
FUNC
FUNC
AF
F1
FUNC
AF
F3 F4 F5
PI SEEK
F3 F4 F5 F6
RDS Operation
Recalling Preset RDS
Stations
Press the FUNC button. The function indicator
will illuminate.
Press the F1 button to activate the AF mode.
The display shows "AF" when the AF mode is
activated.
Press the FUNC button to activate the normal
mode. The function indicator will disappar.
Press the preset location button in which your
desired RDS station is preset. If the preset
BBC R3
station's signal is weak, the unit automatically
searches and tunes to a stronger station in the
AF (Alternate Frequencies) list.
F6
If the preset station and the stations in the AF
list cannot be received:
The unit searches again for a station in the PI
(Programme Identification) list.
If there are still no stations receivable in the
area, the unit displays the frequency of the
preset station and the preset indicator disap-
pears.
If the signal level of the Regional (Local) station
being tuned becomes too weak to receive, press
the same preset location button to tune in a
Regional station in other district.
Note: For presetting the RDS stations, refer to
the Radio Operation section. The RDS
stations can be preset in the F1, F2 and
F3 bands only.
English English