Alpine TDA-7567R Owner's Manual page 34

1
2
34
DEMO
FUNC
DEMO
DEMO
FUNC
Basic Operation
Demonstration
In the Demonstration (DEMO) mode, the unit
scans each source; cassette tape and CD if an
optional CD Shuttle is connected.
Press and hold the DEMO button for at least 3
seconds to activate the DEMO mode.
"DEMO" appears in the display.
The unit automatically performs the following
scanning operation.
1. The unit goes into the tape mode and scans
the selections on the loaded cassette by
playing the first 10 seconds of each selection
starting with the first selection.
2. If a CD Shuttle is connected, the unit will go
into the CD mode. It will play the first 10
seconds of each track starting with track one
of the first disc.
3. The unit continues scanning of the sources
as described in 1 and 2 above.
Note: Depending on the device connected to
the TDA-7567R/TDA-7565R, not all
functions or display indications will
operate as described. For details,
consult your Alpine dealer.
To end the DEMO mode, press the DEMO
button.
"DEMO" disappears from the display.
English