Alpine TDA-7567R Owner's Manual page 46

1
2
3
DN
46
FUNC
FUNC
AF
F1
BBC R3
UP
AF SEEK
F1
SEEK END
RDS Operation
The RDS (Radio Data System) is a radio
information system using the 57 kHz subcarrier of
regular FM broadcast. The RDS allows you to
receive a variety of information such as traffic
information, station names, and to automatically
re-tune to a stronger transmitter that is broadcast-
ing the same programme.
Setting AF (Alternative
Frequencies) Reception
Mode and Receiving
RDS Stations
Press the FUNC button. The function indicator
will illuminate.
Press the F1 button to select the AF (Alterna-
tive Frequencies) ON or OFF mode.
Note: Use the AF OFF mode when automatic
re-tuning is not required.
Press the DN or UP button to tune in the
desired RDS station.
Choose your desired station in 5 seconds after
the above step 2.
Note: When the BAND button is pressed and
held for more than 2 seconds while a
station name is displayed, the display
shows the station frequency for 5
seconds.
When the RDS station signal received has
become weak:
• AF seek mode, press and hold the F1 button
for at least 2 seconds to have the unit
automatically seek a stronger station in the
AF list.
If there is no AF station, the display shows
"SEEK END."
English English