Memory Module - Samson TROVIS 5474 Mounting And Operating Instructions

10.5 Memory module

The use of a memory module (accessory no. 1400-7142) is particularly useful to transfer all
data from one TROVIS 5474 Controller to several other TROVIS 5474 Controllers. The memory
module is plugged into the RJ-12 jack integrated into the front panel. Once the module has
been connected, "74 SP" is displayed. If the memory module already contains data from a dif-
ferent TROVIS 5474 Controller, press the enter key until "SP 74" is displayed.
4
Pressing the enter key to confirm "74 SP" causes the controller settings to be transferred to
the memory module.
4
Pressing the enter key to confirm "SP 74" causes the saved controller settings to be trans-
ferred from the memory module to the controller.
During the data transfer, the bars on the display indicate the progress. After the display stops,
remove the memory module from the controller.
Communication
73
EB 5474 EN