Led Activity Indicators; Data Storage Options - Juniper Allegro 3 Series Owner's Manual

How to Handle a Locked Up Unit
If the Allegro 3 is completely stuck and won't respond,
hold the power key down for 2 to 3 seconds to see if the
menu with the "Power off" option appears, and select that
operation. If that doesn't work, hold the power key down for
10 seconds. This causes a hardware shut off. Press the power
key again to power it on.
!
CAUTION: Forcing a shut-down while the unit is running can
cause damage to the device. NEVER do this to power off an
Allegro 3 in normal circumstances.

LED Activity Indicators

LED activity indicators are located on the keyboard on the
left side shown in the following image:
Red LED on the bottom (associated with power adapter):
„
Blinking - AC adapter is plugged in, and the battery is
charging
Solid - AC adapter is plugged in, and the battery is full
(not charging)
Green LED on the top (associated with notifications):
„
When the operating system has something to notify you
of, this LED behaves accordingly. For example, if you turn
on Location, the green LED blinks periodically.
Blue LED (in the same location as the green LED): The Blue
„
LED is not tied to a key or a notification by default.

Data Storage Options

Flash Data Storage
The Allegro 3 has 16 GB of internal flash data storage. Go
to Settings > Storage to see how much storage is available,
and how it is being used (storing Apps or Images, for
example).
SD Card Slot
Additional storage can be added with an SD/SDXC card.
The SD card slot is located in the battery compartment.
Chapter 2 Standard Features
11