Blst; Ver - Adcon A73 addWAVE Series User Manual

Using terminal commands
TX 1
9193 TX 0
#
TX 5
9193 TX 0
#
B
A
VAILABLE FOR
D Sends a broadcast frame.
ESCRIPTION
P None.
ARAMETERS
R A data block.
ETURNS
R After the device sends the broadcast frame, it will listen for answers. All valid
EMARKS
answers will be listed with their IDs. Not applicable to the A733GSM/GPRS.
R Yes. A device getting this frame would have to wait for a random time (2 to 10
EMOTE
seconds) before performing the actual broadcast; if no terminal is active, no results
will be listed. A list of heard stations with their RF levels will be updated in the
memory and available whenever the BLST command is issued.
E
B
XAMPLE
9193 B 0
#234 BA 0
#7851 BA 0

BLST

A
VAILABLE FOR
D Lists the stations heard after the last broadcast command was issued.
ESCRIPTION
P None.
ARAMETERS
R The date and time when the broadcast was performed, the number of stations
ETURNS
heard, and a list with the heard stations' IDs and their respective RF levels. The
first column shows the stations' IDs, the second column the RSSI value the reply of
the remote station was received with, and the third column the RSSI value the
broadcast was received with by the remote station.
R GET only. Not applicable to the A733GSM/GPRS.
EMARKS
R Yes. The remote version lists only the first 9 stations heard.
EMOTE
E
BLST
XAMPLE
9193 BLST 10/12/1999 12:15:04 4
2008 150 163
2003 177 168
6883 168 170
4027 220 215
#

VER

A
VAILABLE FOR
D Requests the firmware version of the device.
ESCRIPTION
44
A731 A732 A733
A731 A732 A733
A731 A732 A733
A733GSM
A733GSM
A733GSM