Table of Contents
Advertisement
2 Using the A73x RTU
The A73x series of remote telemetry units (RTUs) is part of the A730 series. For
testing purposes, you should have an A730SD/A730MD and/or an A840 Telemetry
Gateway installed before you install your A73x RTU. For information about
installing the A730SD or A730MD, refer to the addVANTAGE A730 User Guide
Version 3.4x. For information about installing the A840, refer to the Base Station,
A840 Telemetry Gateway and Wireless Modem A440 User Guide. The
A733GSM/GPRS RTUs operates in conjunction with an A840 Telemetry Gateway
only.
2.1 Opening the packages
The A73x RTU package contains the A73x RTU, an antenna, and a pipe clamp. If
ordered, the following items come in separate packaging:
Make sure you have received all the equipment and read through the instructions
that follow. When you are sure you understand them, you are ready to install your
RTU.
Fig. 1 and Fig. 2 show the top and bottom view of an A733 addWAVE RTU.
•
A solar panel with pipe clamp
•
A set of aluminum poles
•
An LED tool
•
Sensors and cables, one box for each sensor, and fastening ties in each
sensor box
Using the A73x RTU
11
Advertisement
Table of Contents
