Using Terminal Commands; Cmds; Time; Freq - Adcon A73 addWAVE Series User Manual

3.4 Using terminal commands

Following is a list of available commands and an explanation of their use.
Note: You can type uppercase or lowercase characters because the commands are not
case sensitive.

CMDS

A
VAILABLE FOR
D Returns a list of supported commands.
ESCRIPTION
P None.
ARAMETERS
R A list of strings separated by spaces.
ETURNS
R GET only.
EMARKS
R No.
EMOTE
E
CMDS
XAMPLE
9193 CMDS CMDS ID PMP RSSI TIME FREQ SLOT DATA INFO RX TX
FDEV 0
#

TIME

A
VAILABLE FOR
D Sets/returns the real time clock.
ESCRIPTION
P The actual time, or none in the GET version.
ARAMETERS
R The actual time as dd/mm/yyyy hh:mm:ss.
ETURNS
R GET/SET.
EMARKS
R No.
EMOTE
E
TIME 12/12/1999 22:10:10
XAMPLE
9193 TIME 0
#
TIME
9193 TIME 12/12/1998 22:10:10 0
#

FREQ

C : Do not change the frequency of your device without reason: apart from the fact that
AUTION
it might not communicate in the network anymore, you could also violate the
applicable radio-communications laws in your country. Depending on the
destination country, some models might also return an error message.
A
VAILABLE FOR
D Sets/returns the operating frequency.
ESCRIPTION
P The operating frequency and step (Hz), or none in the GET version.
ARAMETERS
R The actual frequency and step, in Hz.
ETURNS
A731 A732 A733
A731 A732 A733
A731 A732 A733
Performing Advanced Functions
A733GSM
A733GSM
A733GSM
29