Table of Contents
Advertisement
E
For RSM
XAMPLE
ANLG 0
9999 ANLG 0 5 5 5 5 5 5 5 5 4 4 5 5 0
#
For SSMAA (on channel 4)
ANLG 68
9999 ANLG 68 0
#
For DAN (on channel 0)
ANLG 160
9999 ANLG 160 0
#
For RNTTL (on channel 2)
ANLG 178
9999 ANLG 178 340 3900 0
#
For ENOPTR (on channel 10)
ANLG 202 1000
9999 ANLG 202 0
#
ANRT
A
VAILABLE FOR
D
Sets/returns the routing of the hardware analog inputs to frame positions. This
ESCRIPTION
command allows you to change the assignment of physical analog input ports to
data frame positions.
P
None for inquiry. Position of value in frame and input channel for rerouting
ARAMETERS
operations.
R
List of current routings.
ETURNS
R
On inquiry the input channels are output in the order of their position within the data
EMARKS
frame (note: input channel numbers start with 0).
On changing the input channel routings, the first parameter specifies which data
frame position to use for the data value, and the second parameter determines
which input channel to use. The input channels on A733 and A733GSM/GPRS are
numbered from 0 to 11, but on A732 and A723 they are numbered from 0 to 5.
Input channels 0 to 2 are taken from I/O A, cabling 1 to 3; input channels 3 to 5 are
taken from I/O B, cabling 1 to 3; and so on. Two special input channels exist:
A731
A732
A733
16 the value from the RTU's internal temperature sensor (raw values
are in the range of 0 to 4095, which describe temperature values
from -68 to 332 degree Celsius)
Performing Advanced Functions
A733GSM
35
Advertisement
Table of Contents
