Operator Controls; Dil Switches Of The Scalance X414-3E - Siemens SCALANCE X-400 Operating Instructions Manual

6.4

Operator controls

6.4.1

DIL switches of the SCALANCE X414-3E

Availability
Only the SCALANCE X414-3E basic device has DIP switches.
With the SCALANCE X408-2 basic device you can make settings using software and some
settings with the SELECT/SET button, refer to the section "SELECT/SET button
(Page 121)".
Position
Below the labeling strip of the CPU module, on slot 4 there are the four DIP switches. These
DIP switches can have two states (ON/OFF).
Figure 6-2
SCALANCE X-400
Operating Instructions, 06/2015, C79000-G8976-C186-12
Power module, digital inputs and CPU module with operator controls on the SCALANCE
X414-3E
Configuration / project engineering
6.4 Operator controls
117