Table of Contents
Advertisement
Chapter 1
Introduction
▪ Exceeds IEC 61850-3 (electric utility substations)
▪ Exceeds IEC 61800-3 (variable speed drive systems)
▪ Exceeds NEMA TS-2 (traffic control equipment)
▪ Exceeds IEC 61000-6-2 (generic industrial environment)
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
Universal Power Supply Options
• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88-300 VDC or 85-264 VAC
• Popular low voltage ranges: 24 VDC (10-36 VDC), 48 VDC (36-72 VDC)
• Screw or pluggable terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Section 1.2
Ports, Controls and Indicator LEDs
The RSG2200 features various ports, controls and indicator LEDs on the front panel for configuring and
troubleshooting the device.
Figure 1: Front Panel
1. Port Status Indicator LEDs
6. RS232 Serial Console Port (RJ45)
LEDs
Port Status Indicator LEDs
2
1
2. Display Mode Indicator LEDs
These LEDs indicate the state of each port.
When Status mode is selected, these LEDs indicate when ports are active.
• Green (Solid) = Link detected
• Green (Blinking) = Link activity
• Off = No link detected
When Duplex mode is selected, these LEDs indicate when ports are operating in full or half
duplex mode.
• Green (Solid) = Full duplex mode
2
3
6
3. Mode Button
4. Alarm Indicator LED
RUGGEDCOM RSG2200
Installation Guide
4
5
5. Power Module Indicator
Ports, Controls and Indicator LEDs
Advertisement
Table of Contents
