Ports, Controls And Indicator Leds - Siemens RUGGEDCOM MX5000RE Installation Manual

RUGGEDCOM MX5000RE
Installation Guide
• Dual internal MIL grade high reliability fans minimize internal temperature gradient with no outside air exchange
• IEC 60529 IP65 rated; dust tight, water jets
Section 1.2

Ports, Controls and Indicator LEDs

The individual modules on the MX5000 feature various ports, controls and indicator LEDs for configuring and
troubleshooting the device.
Figure 1: Modules
1. Control Module 2. Power Module
6. Management Ethernet Port
Module Indicator LEDs
When the MX5000RE is configured for rack front mounting, these ports, controls and LEDs are located on the
front panel.
Ports, Controls and Indicator LEDs
1
4
10
5
6
7
9
8
3. Line Module (Typical)
7. Utility USB Port 8. RS232 Serial Console Port (DB9)
2
4
4. Alarm Indicator LED 5. Lamp Test/Alarm Cut-Off (LT/ACO) Button
9. Compact Flash Card Port
Introduction
3
10. Power
Chapter 1
3