4. FINAL OPERATIONS
After replacing the nozzles, reposition the flame-spreader crowns, the
burner caps and the grids.
4.1
Light the burner and take it to the minimum .
Remove the knob and turn the regulation screw
inside or next to the gas tap pin (depending on
the model) until you get a suitable minimum
flame.
Replace the knob and check burner flame
stability: (rapidly turning the knob from maximum
to minimum position, the flame should not go
out). Repeat the operation on all the gas taps.
4.2
1
2
3
4
12
Instructions for the installer
Adjustment of the hob burner minimum level for natural gas
Arrangement of the burners on the hob
Burners
Auxiliary
Semi rapid
Rapid
Wok