17.
Use (2) tension bolts #33 to align
motor pulley with front roller pulley.
18.
Loop drive belt #54 around drive
motor pulley, then use tension bolt
#32 to tighten drive belt.
19.
Tighten (4) bolts #77 fully.
20.
Plug motor and RPM sensor back into
MCB.
21.
Prior to replacing shrouds, perform a
calibration on the console .
(See page 6)
Warning: This step requires
the power to be on. Exercise extreme
caution when working around live
electrical components.
22.
Reinstall shrouds.
23.
Procedure is complete.
Page 40
33
33
32
32
54
54
4-TR: Tension Motor