Star Trac 4-TR Service Manual page 33

6. Remove the (8) bolts #26 from the
deck retention rods #2 and deck stops
#107 &#108.
7. Remove deck retention rods #2 then
deck stops #107 &#108.
8. Rotate the deck to remove.
9. Remove deck #134.
10. Remove running belt #55 by sliding off
rollers.
11. Inspect drive belt #54 for wear or
damage and replace if necessary.
Optional: Replace Deck Cushions
12. Remove old deck cushions #1 by
carefully using a cutting tool at the
base while peeling up with the other
hand.
13. Thoroughly clean area under cushions
(yellow) with a putty knife to clear any
remaining rubber debris then use 180
grit sandpaper to clean and roughen
the frame surface.
Page 32
26 26
2 2
4-TR: Release Deck
4-TR: Rotate/Remove Deck
1 1
4-TR: Replace Deck Cushions
107 107
108 108