Star Trac 4-TR Service Manual page 35

18. Optional: Replace head or rear roller
at this time if necessary.
19. If only one side of the deck has been
used, flip it prior to installation,
otherwise replace.
Caution: reusing a worn deck
face will cause early wear and may
void your warranty.
20. Slide deck and new belt #55 into frame
around rollers. Arrows on Startrac logo
point in direction of belt movement.
21. Install the drive belt #54 on the motor
pulley.
22. Secure head roller with bolt #16 and
washers #43 & #44
23. Install deck stops #107 &#108 with (4)
bolts #16.
Page 34
55 55
4-TR: Install Running Belt
54 54
4-TR: Tighten Head Roller
16 16
44 44
43 43