Star Trac 4-TR Service Manual page 36

24. Secure deck with (4) bolts #26 in the
deck retention rods #2.
25. Using Lube-N-Walk kit <<hotlink
pending>>, lubricate the deck.
26. Apply the silicone lube onto the
sponges (blue) on both sides of the
applicator (included in the kit)
27. Insert the applicator under the belt so
that it can be grasped from both sides.
28. Move the applicator towards the
motor compartment then back
towards the rear roller.
29. Rotate the belt manually and repeat.
30. Remove applicator.
4-TR: Apply Lube to Applicator
4-TR: Lubricate Belt
Page 35