Roland TU2-64 User Manual page 29

2.
Fasten the media to the paper tube.
Make sure

reaches the paper tube. Check to make sure the media is pulled out straight at this time.
If the media is not straight, redo the loading operation.
Using adhesive tape, fasten the center and side edges of the media to the paper tube

(fasten a total of three locations).
Secure the center of the media in place while keeping the media stretched taut to keep
it free of slack.
While pulling the media from the center outward, fasten the left and right edges.
Take-up with outward curl
Paper tube
Take-up with inward curl
Paper tube
is lighted, then use
Adhesive tape
Adhesive tape
to pull out the media until its leading edge
4. Operation
27