3. Assembling and Installing
Other Models (VS series, RS series, VP series, SP-300V/300, SP-540i/300i, RA-640, RE-640 etc.)
Press against
the stand leg.
Frame
After securing in place, hold the unit at the locations shown in the figure, apply gentle pressure, and make sure the
assembly is free of looseness. If looseness is present, again press the take-up unit against the stand leg and caster
and tighten the small bolts.
18
Small bolts
Hex wrench
(small)
Mounting fixture C
Press against
the stand leg.
Small bolts
Hex wrench
(small)
Small bolt
Mounting
fixture A
Control box
Mounting
fixture A
Bolts with
washer
Mounting
Hex wrench
fixture B
(small)
Bolt with
washer
Mounting
fixture B