Roland TU2-64 User Manual page 22

3. Assembling and Installing
Attach the end caps to the paper tube and secure the arm in place.

First, fit the paper tube securely onto the end cap on the same side as the right stand leg. Next, press the end cap on
the same side as the arm into the paper tube and securely fit the end cap into the paper tube. Finally, secure the arm
in place using the arm retaining screw.
Arm
Fit onto this securely.
For the paper tube, use the included item. Using something other than the included item may result in spinning without
traction or other problems that impede media take-up.
20
Tighten the screw
while pressing down
OK
from above.
Not
OK
Paper tube
End cap
Paper
tube
Fit onto this securely.