Roland TU2-64 User Manual page 19

Other Models (VS series, RS series, VP series, SP-300V/300, SP-540i/300i, RA-640, RE-640 etc.)
Stand leg
Frame
 Attach mounting fixtures B and C and secure the take-up unit to the stand.
Tighten the screws while holding the take-up unit pressed against the stand leg.
PRO II/PRO II V series, SP-540V
Press against
Small bolts
the stand leg.
Frame
Control box
Bolts with washers
Hex wrench
(small)
Front side of the printer
Place
Place
pressed
pressed
against.
against.
Hex wrench
(small)
Mounting fixture C
Mounting
fixture A
Stand leg
Caster
Place pressed
against.
Mounting
fixture A
Control box
Mounting
fixture A
Bolts with
washers
Mounting
fixture B
Hex wrench
(small)
Bolt with
washer
Mounting
fixture B
3. Assembling and Installing
Top
Slot
Bottom
Mounting fixture A
The left and right sides
have no handedness.
Control box
Press against
the stand leg.
Small bolts
Hex wrench
(small)
Small bolt
Mounting
fixture A
17