Roland TU2-64 User Manual page 17

Place the rail slider on the control box and the frame and secure it in place.

Line up the tab on the frame with the slot in the rail slider, then use large bolts to secure it in place first to the control
box, and then to the frame.
Line up the tab with the slot.
Bottom surface of the rail slider
slot
Slot
Tab
Lay the unit on its side oriented as shown in the figure, then use large bolts to fasten the

control box and the frame to the support bar.
Large bolts
Hex wrench
(large)
Control box
Support bar
Large bolts
3. Assembling and Installing
Hex wrench
(large)
Large bolt
Frame
15