Jackson TempStar Series Installation, Operation And Service Manual page 59

PARTS
ITEM QTY
1 1
2 2
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 2
11 2
12 1
13 2
14 2
15 1
When servicing plumbing components, take care not to damage the threads of each individual item. Damaged threads
can cause leaks and loss of pressure, which could adversely affect the performance of the dishmachine. It is strongly
recommended that teflon thread tape, used in conservative amounts, be applied to threads when joining components
together. It is not advised to use thread-sealing compounds, sometimes referred to as "pipe dope." Compounds can be
ejected from the threads during the tightening process and become lodged in key components, rendering them useless.
07610-002-23-32-AC
DESCRIPTION
Y-strainer, 3/4" NPT Brass
Nipple, 3/4" x 1 3/8" Closed Brass
Bracket, Incoming Plumbing Support
Tee, 3/4" x 3/4" x 1/4" Brass
Valve, Ball Test Cock, Bronze
Gauge, Pressure 1/4" BTM Connect
Solenoid Valve, 3/4", 220 V
Nipple, 3/4" x 2" NPT Brass
Elbow, 3/4" Street Brass, 90-Degree
Union, 3/4" Brass with O-ring
Adapter, 3/4" Female
Tube, Copper 3/4" x 48"
Elbow, 3/4"
Adapter, 3/4"
Tube, Copper 1/2" x 3.25"
NOTICE
INLET PLUMBING
PART NUMBER
04730-717-02-06
04730-207-34-00
05700-021-34-02
06685-111-88-34
04810-011-72-67
06685-111-88-34
04810-100-03-18
04730-207-46-00
04730-206-04-34
05700-002-63-79
04730-401-11-01
05700-011-87-89
04730-406-16-01
04730-401-10-01
05700-002-25-06
51