Table of Contents
Advertisement
Replacing the chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the chassis fan with the screw holes on the chassis.
2
Replace the four screws (#6-32xL6.35) that secure the chassis fan to the
chassis.
3
Route the chassis-fan cable under the bracket.
4
Connect the chassis-fan cable to the system board.
Post-requisites
1
Follow the procedure from step 5 to step 8 in
2
Replace the
front
3
Replace the
computer
computer. After working inside your computer, follow
After working inside your
bezel.
cover.
computer. For more safety best
www.dell.com/
"Replacing the optical
Before
drive".
61
Advertisement
Table of Contents
