Avaya 1600 Series Installation Manual page 63

HP Procurve CLI output
; J8164A Configuration Editor; Created on release #H.08.60
hostname "AvayaLabs"
snmp-server community "public" Unrestricted
vlan 1
name "Native"
untagged 1-2,4,7-26
ip address 192.168.202.201 255.255.255.0
no untagged 3,5-6
exit
vlan 100
name "Red [Voice]"
untagged 5
tagged 3
exit
vlan 101
name "Blue [Data]"
untagged 3,6
exit
gvrp
spanning-tree
The table below summaries the HP configuration for ports and VLANs.
Port VLAN 100 VLAN 101
Voice Data
3 Tagged Untagged
5 Untagged –
6 – Untagged
The operation of this network is dependant on the functionality defined in HP documentation. Specifically, HP refers to this
type of VLAN operation as Overlapping VLAN.
H323 Telephone Installation
IP Office™ Platform 11.0
Description
This port was added to both VLAN 100 and VLAN 101.
Note: When adding port 3 to VLAN 100 the Mode option must be tagged, but it
must be untagged when adding to VLAN 101.
This port is included only in VLAN 100 and not included in VLAN 101.
The Mode option must be set to Untagged for port 5 in this VLAN.
Port 6 is included only in VLAN 101 and not included in VLAN 100.
The Mode option MUST be set to Untagged in this VLAN.
Comments on this document? infodev@avaya.com
Installation: Other Installation Options
Issue 23e (Friday, February 15, 2019)
Page 63