Thirty-Two-Point Input Units (With Screw-Less Clamps) - Omron ERT1 Series Operation Manual

Screw-less Clamp Terminals
4-2-2

Thirty-two-point Input Units (with Screw-less clamps)

Input Specifications
Component Names and Functions
(2)
ERT1-ID32SLH-1
Item
Input points
Internal I/O common
ON voltage
OFF voltage
OFF current
Input current
ON delay time
OFF delay time
Number of circuits
Isolation method
Input indicators
Power supply short-circuit
protection
Disconnection detection
Current consumption
Connection forms
Mounting
Weight
Standard accessories
(1)
(4)
(3)
(1) Rotary Switches
These switches are used to set the node address.
(2) Ethernet Connector
The network communications cable is connected to this connector.
32 points
PNP
15 V DC min. (between each input terminal and 0 V)
5 V DC max. (between each input terminal and 0 V)
1.0 mA max.
6.0 mA max. at 24 V DC
3.0 mA max. at 17 V DC
1.5 ms max.
1.5 ms max.
16 points with one common circuit
Photocoupler isolation
LEDs (yellow)
Operates at 50 mA/point min.
Operates at 0.2 mA/point max.
Communications power supply (including internal cir-
cuits): 110 mA max.
Screw-less clamp terminal blocks (orange)
35-mm DIN Track mounting
485 g max.
FKMCP1.52STF3.5AUSOO (Phoenix Contacts) (con-
nector with lock screws)
(7)
(5)
Section 4-2
Specifications
(8)
(6)
47