Omron ERT1 Series Operation Manual page 52

Overview of System Startup Procedure
Common Procedure 7-4. Downloading the Connection Settings to a Device.
32
This completes the connection settings.
This section explains how the connection settings made with the Network
Configurator are downloaded to the devices and enabled.
Either of the following two methods can be used.
• Downloading the same connection settings to all devices in the Network
Configurator
• Downloading connection settings only to selected devices
Common Procedure 7-4-1 Downloading the Same Connection Settings
Use the following procedure to download the same connection settings to all
Depending on the status of the connected PLC, a window like the one shown
below may be displayed.
When a connection has been set,
a mark like this will be displayed.
to all Devices in the Network Configurator
of the devices displayed in the window.
Click Network - Download.
Click the Yes Button.
Section 2-1