Cisco ASA Series Cli Configuration Manual page 631

Chapter 1 Defining Route Maps
Feature History for Route Maps
Table 1-1
Table 1-1 Feature History for Route Maps
Feature Name
Route maps
Enhanced support for static and dynamic route
maps
Support for Stateful Failover of dynamic
routing protocols (EIGRP, OSPF, and RIP) and
debugging of general routing-related operations
Dynamic Routing in Multiple Context Mode
lists each feature change and the platform release in which it was implemented.
Platform
Releases
7.0(1)
8.0(2)
8.4(1)
9.0(1)
Feature Information
We introduced this feature.
We introduced the following command: route-map.
Enhanced support for dynamic and static route maps was
added.
We introduced the following commands: debug route,
show debug route.
We modified the following command: show route.
Route maps are supported in multiple context mode.
Cisco ASA Series CLI Configuration Guide
Feature History for Route Maps
1-7