Cisco ASA Series Cli Configuration Manual page 743

Chapter 1 Configuring IPv6 Neighbor Discovery
Related Documents for IPv6 Prefixes
Related Topic
ipv6 commands
RFCs for IPv6 Prefixes and Documentation
RFC
RFC 2373 includes complete documentation to show
how IPv6 network address numbers must be shown in
router advertisements. The command argument
ipv6-prefix indicates this network number, in which the
address must be specified in hexadecimal format using
16-bit values between colons.
RFC 3849 specifies the requirements for using IPv6
address prefixes in documentation. The IPv6 unicast
address prefix that has been reserved for use in
documentation is 2001:DB8::/32.
Feature History for IPv6 Neighbor Discovery
Table 1-2
Table 1-2 Feature History for IPv6 Neighbor Discovery
Feature Name
IPv6 Neighbor Discovery
Address Config Flags for IPv6 DHCP Relay
Document Title
command reference
Title
IP Version 6 Addressing Architecture
IPv6 Address Prefix Reserved for Documentation
lists each feature change and the platform release in which it was implemented.
Releases
7.0(1)
9.0(1)
Feature History for IPv6 Neighbor Discovery
Feature Information
We introduced this feature.
We introduced the following commands: ipv6 nd
ns-interval, ipv6 nd ra-lifetime, ipv6 nd suppress-ra,
ipv6 neighbor, ipv6 nd prefix, ipv6 nd dad-attempts,
ipv6 nd reachable-time, ipv6 address, ipv6
enforce-eui64.
We introduced the following commands: ipv6 nd
managed-config-flag, ipv6 nd other-config-flag.
Cisco ASA Series CLI Configuration Guide
1-15