Stored Programs - Hach DR 6000 User Manual

5.4

Stored Programs

9. Select the required data analysis interval.
You can select between a fixed interval and an individually
adapted interval with start- and end date.
10. Press OK to confirm.
11. Choose an upper and lower control limit for the first and
second parameters and press Next to confirm.
12. In Ratio Settings you get all selected functions shown.
Press OK to confirm.
13. Select the ratio with the defined settings from the ratio
directory. Press Select.
A table with the defined values is shown.
Values outside the defined limits are displayed in red.
Over 200 pre-programmed processes can be recalled via the
Stored Programs menu. Stored Programs do not include any
barcode tests.
Standard programs
57