Trends; Carousel Insert; Link2Sc; Dr 6000 Website - Hach DR 6000 User Manual

6.8.5

Trends

6.8.6

Carousel insert

6.8.7

LINK2sc

6.8.8

DR 6000 website

Use this function to call up a load curve of the stored
measurement values for each parameter or sample location. The
concentration of the corresponding parameter is shown
graphically over time. For a detailed description, refer to
section 5.3.4.1, page 53.
This function is shown when an optionally available carousel
insert (sample changer) is used.
There is a carousel for 1 inch rectangular cells and one for
1 cm rectangular cells available.
Additional information can be found in the carousel user manual.
Link2SC enables the exchange of measurement values between
online process probes and the DR 6000. This enables online data
to be verified and process probes to be corrected as necessary.
The online data is sent to the DR 6000 in a "job file". After the
laboratory measurement values have been produced, the job file
is sent to the controller again for the corresponding probe to be
corrected.
Data transfer is either via memory card or network (LAN). Please
take a precise description from the LINK2sc user manual
(DOC012.xx.90329).
Use this function to call up a website via an existing network
connection. Current software updates, as well as documentation
and information on the DR 6000 can be found here.
The labelling of the key varies from model to model and may vary
from the illustration in these instructions.
Expanded programs
131