Front Panel; Rear Panel (Connecting Your Equipment) - Roland DJ-808 Owner's Manual

Front Panel

1
Headphones
1
[PHONES] jacks
Connect headphones here.
Stereo 1/4" (Ø 6.3 mm) and stereo 1/8" (Ø 3.5 mm) plugs are supported.
2
[VOLUME] knob
Adjusts the volume of the headphones.
3 [MIXING] knob
Adjusts the monitor volume balance of the channel whose Channel [CUE]
button is lit and the master output.
* This is functional if the [MONO SPLIT/STEREO] switch is set to STEREO.
4
[MONO SPLIT/STEREO] switch
Switches the headphone output between mono (MONO SPLIT) and stereo
(STEREO).
The sound of the channel whose Channel [CUE] button is lit is heard from the
MONO SPLIT
L-side, and the master output monitor is heard from the R-side.
The sound of the channel whose channel [CUE] button is lit is mixed with the
STEREO
master output, and output in stereo.
5 [CROSS FADER ASSIGN] switches
Specify the output destination of the channels.
A
Output to cross fader A.
THRU Not assigned to the cross fader.
B Output to cross fader B.

Rear Panel (Connecting Your Equipment)

Microphone
1 2 3
XLR type
TRS type
Phone type
Powered speaker, amp
2 3 4
Turntable
(analog)
4 5 5 6
Powered speaker
5
6
6
[INPUT SELECT] switches
Select the input source for each channel.
CH1, CH2
The sound loaded into the Serato DJ deck is the source.
PC
Select this if you're using DVS.
LINE The line level input is the source.
PHONO The phono level (MM type cartridge) input is the source.
CH3, CH4
The sound loaded into the Serato DJ deck is the source.
PC
Select this if you're using DVS.
LINE The line level input is the source.
USB The input from the USB HOST port is the source.
7
[CROSS FADER] switch
Switches the response curve of the cross fader.
8 [CH FADER] switch
Switches the response curve of the channel faders.
9 10
7 7
8
DJ player
Audio player
Panel Descriptions
7 8
Turntable
(analog)
11
MIDI device
USB audio
compatible device
9