Assembling The Main Switch - Husqvarna 536LiHE3 Workshop Manual

Repair Instructions

9.13 Assembling the main switch

For products with S/N: -20180400173 (LiHE3).
1
Connect the contact (C) to the main switch.
NB! Make sure to apply grease to the contact
surfaces and also the connector.
2
Connect cable (A) and place the main switch in the
battery housing.
3
Assemble the throttle trigger lock and throttle trig-
ger as described in "7.2 Assembling the throttle
trigger lock and throttle trigger" on page 18.
4
Assemble the control handle as described in "6 Ba-
sic dismantle/assembly" on page 16.
For products with S/N: 20180400173- (LiHE3).
1
Connect cable (A) and make sure that the contact
clicks into place.
Place the main switch in the product housing.
2
Assemble the throttle trigger lock and throttle trig-
ger as described in "7.2 Assembling the throttle
trigger lock and throttle trigger".
3
Assemble the control handle as described in "6 Ba-
sic dismantle/assembly".
C
S/N: –20180400173
S/N: –20180400173
S/N: 20180400173–
A
A
English – 39