9.3 Assembling the gear package
1
Lubricate the parts marked in the figure. Lubricate
each part with approx. 2.5 g grease.
NOTE!
Lubricate moving parts on gears and the
cutting unit with grease so that they move
easily! Use grease according to IPL.
Assemble the cutting unit and gear package in the
bevel gear.
2
Assemble the two screws holding the cutting unit in
the gear.
Lubricate the points marked in the figure with 2.5 g
grease.
3
Assemble the screws holding the gearbox cover,
6 pcs.
Repair Instructions
English – 28