Husqvarna 536LiHE3 Workshop Manual page 36

Repair Instructions
8
Assemble the indexing ring (4)
1
Assemble the bushing (3).
2
Assemble the clamp (2).
3
Assemble the joint for the transport mode sensor
4
(1).
9
Assemble the lower joint cover.
Assemble the adjusting screw used to adjust the
inertia of the angle joint.
10
Refers to side without cabling.
Assemble the cabling.
Assemble the lockwasher holding the cabling in
place in the lower cover.
11
Assemble the cutting unit and gear package
according to 9.4 Dismantling and assembling the
cutting unit on page 30
English – 36