6 Maintenance
9 Waterafscheider aftappen
Empty the separately installed water separa-
tor:
• Disconnect the sensor connector (plug con-
nection)
• Unscrew the drain plug/sensor on the under-
side of the filter.
• Allow the water to drain out and close the
drain plug/sensor.
• Reconnect the sensor connector.
The water separator is not engined mounted,
but installed is required and the sensor must
be connected.
Draining of water from the water separator/fuel filter
Do not smoke when draining off water and
sediment. Keep flame and sources of ignition
out of the area. Remove spilled fuel and litter
before you start the engine.
Every 100 operating hours.
D
anger
45