Control Lever - Vetus D-LINE VD4.120 Operation Manual

2 Introduction
Single lever control
handle for two engines
5 Operating lever
Operating lever for 1 or 2 engines.
gearbox reverse
Single lever control
handle for 1 engine
The engine or engines are typically controlled
with a single-lever.
Depending on the brand and type (mechani-
cal or electronic), there may be minor diffe-
rences in the mode of operation. Please refer
to the engine manual for details.
However, the principle is always as indicated
above.
neutral
reverse throttle
The control lever works as shown in the dia-
gram.
Starting from neutral put the engine in ahead
or astern by moving the lever 35° forwards or
backwards.
The throttle lever operates at an angle of 60°
forwards and 60° reverse.

Control lever

gearbox forward
forward throttle
17