Leg Attachment; Caster Attachment - Blodgett 900 Series Installation Manual

OVEN ASSEMBLY

LEG ATTACHMENT

1. Put the oven onto a lift with the bottom of the oven down.
2. Each leg is attached by three bolts to the underside of the oven base frame.

CASTER ATTACHMENT

1. Bolt supports to oven with 1/2-13 hex head bolts (casters with brakes should be facing front of oven.)
2. Carefully place oven onto the casters. (It will be necessary to have several persons lift oven off the pallet and set it onto
the casters). Engage brakes on front casters.
NOTE: A fixed restraint must be provided if casters are used in conjunction with a flexible connector for movable appliances.
This restraint must secure the oven to a non-movable surface to eliminate stress on the connector. If the oven is
moved, the restraint must be reconnected after the oven is returned to it's normal position.
Restraint Cable
1. Mount the supplied bracket to the leg bolt just below the gas inlet.
2. The clip on restraining cable can be attached to the mounting bracket.
DECK OVENS
Figure 1
Restraint Cable
Bracket
Figure 2
4 INSTALLATION