Furuno MU-190V Operator's Manual page 15

2. Set the mounting bracket to the mounting location
with four self-tapping screws.
3. Attach the bracket support to the rear of the mon-
itor unit with the binding head screws (9 pcs.).
4. Connect all cables at the back of the monitor unit. See section 1.5.
5. Loosen the knobs of the bracket support and
set them in the notches on the mounting
bracket.
6. Adjust the angle of the monitor unit and fix the knobs tightly.
Self-Tapping Screw
Mounting Bracket
6
1. MOUNTING, WIRING
5x20
Mounting
Bracket
Binding Head Binding Head
Screw Screw
(9 places) (9 places)
Bracket
Support
Knob