This section describes transferring screens online to and from the host computer. Functions used to create screens and
control display attributes on the PT are described in Section 4 Display Functions. Functions used to input data on-screen
are described in Section 5 Input Functions. Data transfer and maintenance functions are described in Section 6 System
Menu.
Screen data can be transmitted online (i.e., in RUN Mode) by means of a Host Interface Unit command. For details on
commands, refer to information on online transfers in the Host Interface Unit Operation Manual. This function is valid
only for RS-232C and RS-422 Host Interface Units.
7-1
Transferring Screen Data
7-2
Host to PT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-3
PT to Host
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-4
Online Transmission and Resume Function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 7
Online Transfer
64
64
64
65
63