Debugging The Hmi Application; Preparations For Online Debugging - Omron NA5-15*101 series Startup Manual

4 Creating and Debugging the HMI Application
4-8

Debugging the HMI Application

You can verify the operation of an NA-series Programmable Terminal by performing simulations on the
Sysmac Studio. Simulations like this are used for offline debugging. If the actual hardware is not avail-
able, operation is verified with offline debugging. There are two ways to perform offline debugging: Exe-
cute only the HMI project to verify the operation of the HMI independently or connect to the Controller
Simulator to verify operation.
Additional Information
If you verify operation only with the HMI Simulator, you can check the operation of objects, but
there is no way to verify operation according to values in the Controller. To debug the operation
for values in the Controller, you must connect to the Controller Simulator.
4-8-1

Preparations for Online Debugging

Use the following procedure to build the project to prepare for online debugging.
1
Select Build HMI from the Project Menu.
The results of building the project are displayed in the Build Tab Page. If you find an error, cor-
rect the project.
4 - 18
Useful Function
If you click an error line, you can
jump to the corresponding location.
NA-series Programmable Terminal Startup Guide (V120)