Configuration Of System Menu - Omron NT20M Operation Manual

Configuration of System Menu

6-1 Configuration of System Menu
SYSTEM MENU
Quit
Transmit Mode
Quit
Occur.
Quit
Function Key
52
The system menu is used to set PT system parameters in advance and per-
form maintenance. With the system menu you can, in addition to determining
the PT's status, check switch settings and perform simple I/O checks.
(1) If there is no key input within 10 s, the original screen will be
automatically reset.
(2) The RUN indicator will be OFF during system menu operations.
Maintenance
Mode
Display History I/O Check
Freq.
Touch Switch
Comm. Check
Tool I/F Host I/F
To return to the original screen after selecting Maintenance Mode, do
one of the following:
Select Quit, and press the Enter Key.
Or press the Buzzer Key, Up Key, and Down Key simultaneously.
The RUN indicator on the front panel is OFF while the System Menu is
being displayed.
Status Check
Quit
Init. Screen Init. Table
Quit
Key Press Sound
LCD Display Key Press Sound
Section 6-1
Init. Memory Memory SW
Init. History
Backlight Off Resume
Backlight Check