Set The Date And Time - Bowflex Max Trainer M7 Service Manual

Hide thumbs Also See for Max Trainer M7:

Table of Contents

This document provides instructions to set the Date and Time for proper tracking of workouts on the Bowflex Max Trainer

NOTICE:

If you need assistance, please call

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all

Warnings on this machine.

Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | Printed in China | © 2016 Nautilus,

Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and Bowflex Max Trainer are trademarks owned by or

licensed to Nautilus, Inc.

Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:

This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand

all Warnings on this machine.

• Read and understand the Part Replacement Procedure before working on the machine. Failure to obey the instructions and safety warnings could cause

injury to the service technician or bystanders.

• Keep bystanders and children away from the product being serviced at all times.

• Make sure that the repair is done in an appropriate work space away from foot traffic and exposure to bystanders.

• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these

components. Do not try to do heavy or awkward steps on your own.

• If replacement parts are necessary, use only genuine Nautilus replacement parts and hardware. Failure to use genuine replacement parts can cause a

risk to users, keep the machine from operating correctly and will void the warranty.

• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or replac-

ing components. If necessary request replacement warning stickers or placards from Nautilus customer service.

• Do not try to change the design or functionality of the machine being serviced as this can adversely effect user safety and will void the warranty.

• Do not use the machine until all shrouds, instructions, warning labels and correct functionality have been verified and tested for correct performance.

• This product contains magnets. Magnetic fields can interfere with the normal use of certain medical devices at a close range. Users may come into prox-

imity of the magnets in the assembly, maintenance, and/or use of the product. Given the obvious importance of these devices, such as a pacemaker, it is

important that you consult with your medical provider in connection with the use of this equipment. Please consult the "Safety Warning Labels and Serial

Number" section in the Owner's Manual to determine the location of the magnets on this product.

With the machine at the Power-Up Mode (GET READY screen), push and hold down the PAUSE/STOP and ADD TIME buttons for 3 seconds to go

into the Date/Time Setup Mode.

Note: Push PAUSE/STOP to exit the Date/Time Setup Mode and return to the Power-Up Mode screen.

The Console display shows SET DATE and the current values (month / day / year).

Use the Burn Rate Increase/Decrease buttons to adjust the value, and push the ENTER/START button to set and move to the next value.

After setting the year value, the Console display shows SET TIME and the current values (hour / minute / AM or PM).

Use the Burn Rate Increase/Decrease buttons to adjust the value, and push the ENTER/START button to set and move to the next value.

After setting the AM or PM value, the Console will accept the values and exit the Date/Time Setup Mode. The Console will display the Power-Up

Mode (GET READY screen).

If you live in a part of the world that adjusts their clocks, such as for Daylight saving time, you will need to adjust the time on the machine when these

events occur for proper workout tracking.

Set the Date and Time on the

Bowflex Max Trainer

Bowflex

Customer Service at 1-800-605-3369.

Service Procedure

Skill Level: I

8012348.091516.B

M7.

Table of Contents