Bowflex Max Trainer M7 Service Manual page 138

4. Using a 5mm hex wrench, remove the 4 screws (2 on each side of
the Console Mast) from the Console Assembly.
5. Carefully lift the Console Assembly and expose the Cable Connec-
tions.
Note: do not crimp any of the Console Cables. This step may
require two people.
6. Carefully disconnect the Cables while not allowing them to fall into
the Console Mast.
Note: do not crimp any of the Console Cables.
7. Place the Console Assembly in a safe and secure location.
138