Basic Commissioning With Iop - Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual

4.1.1

Basic commissioning with IOP

Basic commissioning wizard
1.
2.
3.
4.
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Select "Basic Commissioning..." from the Wizards
menu.
Select "Yes" or "No" to a factory reset.
It is recommended that a factory reset is performed to
ensure that the converter is in a known and stable state
prior to commissioning.
Once "Yes" is selected the IOP will initiate a factory
reset immediately.
On completion of the factory reset the "Application
Class" is selected.
In this example the "Standard Drive Control" is selected.
Select the correct Motor Data for your Inverter and at-
tached motor.
This data is used to calculate the correct speed and
displayed values for the application.
Wizards
4.1 Example wizard
33