Initial Set-Up - Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual

Installation

3.2 Initial Set-up

3.2 Initial Set-up
Initial set-up sequence
Once the IOP is fitted and powered-up it will automatically detect the type of Control Unit and
Power Module to which it has been fitted. On first-time use, the IOP automatically displays
the option to select the default language and allow the time and date to be set (if the Control
Unit to which the IOP is fitted has a real-time clock).
After the initial start-up screen has been displayed, the IOP
will then display details of the type of Control Unit and Power
module, including the orders numbers.
After the Identification screen has been displayed the Lan-
guage selection screen will be displayed.
Once the language is selected - the Wizard menu is dis-
played.
Note:
The IOP is delivered with only the Basic Commissioning wiz-
ards. All other wizards can be downloaded using the IOP up-
dater tool. For futher information, please see Firmware and
language upgrade (Page 23).
18
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
Intelligent Operator Panel (IOP)