Overview; Introduction - Siemens SINAMICS Intelligent Operator Panel Operating Instructions Manual

Overview

2.1

Introduction

Compatibility
The Intelligent Operator Panel (IOP) has been designed to enhance the interface and
communications capabilities of SINAMICS Inverters.
The IOP connects to the Inverter through an RS232 interface. It has been designed to
automatically recognize the following devices from the SINAMICS range:
● SINAMICS G120 CU230P-2
● SINAMICS G120 CU240B-2
● SINAMICS G120 CU240E-2
● SINAMICS G120 CU250S-2
● SINAMICS G120C
● SINAMICS G120D-2 CU240D-2*
● SINAMICS G120D-2 CU250D-2*
● SINAMICS ET 200pro FC-2*
● SINAMICS G110D*
● SINAMICS G110M*
● SINAMICS S110 CU305*
*Denotes Control Units that require the IOP Hand-Held Kit to connect the IOP to the Control
Unit.
Hand-Held Kit order number: 6SL3255-0AA00-4HA0.
Optical cable order number: 3RK1922-2BP00 (not required for the SINAMICS S110 CU305)
For information on firmware and language upgrades, please see Firmware and language
upgrade (Page 23).
Note
IOP functional support
• Drives with SINAMICS firmware prior to version 4.2 may not be fully supported by the
IOP.
• The actual menu structure and functionality of the IOP will be influenced by the following
factors:
– The software version and type of Control Unit to which the IOP is fitted.
– The firmware and software version of the IOP.
– The selected functional group filtering of the parameters.
Intelligent Operator Panel (IOP)
Operating Instructions, 08/2015, FW V1.6.1, A5E00110011B AF
2
11