System Configuration - Furuno MU-201C Operator's Manual

SYSTEM CONFIGURATION

100-230 VAC
Multi-purpose LCD display MU-201C
FCV-30
FSV-24/30
FCV-1200L
FR-2105
FAR-2117/2817 series
GD-280/380/680
CH-250/270/300
CI-68/88
*: SXGA: 1280x1024 dot, XGA: 1024x768 dot, VGA: 640x480 dot
Note1: Portrait orientation equipment cannot be connected to the MU-201C.
Note2: Non-VESA equipment cannot be connected to the MU-201C.
Note3: When inputted signal differs in resolution, characters and lines are not shown
clearly.
Note4: Missing dot, limited viewing angle and display flicker are inherent characteristics of
the LCD color display.
Note5: It takes about five seconds to switch the signal between RGB and DVI.
Connectable equipment
Equipment
SXGA, XGA
SXGA
VGA
SXGA
SXGA
VGA
VGA
VGA
DVI
RGB
IF-
8000
*: When connecting the FCV-1200L or
CH-250 as the main display unit,
connect it to the interface unit (IF-8000).
Resolution*
RGB
RGB
RGB
RGB
DVI
RGB
RGB
RGB
iv
Radar
(FAR-2117/2817 series)
Video Plotter, Video Sounder,
Scanning Sonar, Radar, etc.
Control unit of
Video Sounder or
Scanning Sonar*
Processor unit of
Video Sounder,
Transceiver unit of
Scanning Sonar*
Navigator (GPS, etc.)
NMEA
0183
Image output